It is the most versatile and speedy method of transferring bulk material from one point to another within a defined area. Pneucon are engaged in offering wide range of Cement feeding system which is used for feeding the cement feed the cement in construction sites. These Cement feeding systems are manufactured by using supreme grade of raw material and are highly demanded in various production industries.
The PNEUCON Screw Pumps are heavy-duty, screw-type pneumatic pumps. These pump systems are most commonly used to convey dry, free-flowing, pulverized materials from grinding mills, transfer materials from silo to silo, transfer dust from collectors, and load and unload railcars, ships and barges. The materials are conveyed literally anywhere a pipeline can be run and to any number of delivery points.
PNEUCON Screw Pumps are constructed of mild and structural steel, and mounted on a base. PS pumps are equipped with pedestal blocks that support a pump screw which helps to provide a smooth, balanced operation. The screw is dynamically balanced and areas of this screw, along with other parts of the pump in direct contact with the material to be conveyed, are made of hardened, wear-resistant material and special hard surfacing where required. The screw is directly coupled to the driving motor but can be v-belt driven.
Standard equipment on PS pumps includes a pressurized seal and bearing assembly that extends the service life of the discharge seals by preventing the material being handled from entering the bearing area. Each pump system includes the pump, drive motor and compressed air source.
The materials to be conveyed enter the hopper by gravity or dumped by any means. The material is compacted as it is advanced. Its density is further increased in the space between the terminal flight of the screw and the face of the non-return valve to form a seal against the transport line pressure, thus preventing blowback. The material then enters the discharge body, is fluidized by compressed air, and is conveyed into the transport line.
|SR. ||ITEM DESCRIPTION ||SPECIFICATION |
|01 ||MODEL ||PSP-I ||PSP-II |
|02 ||OUTPUT CAPACITY* ||12-15 TON/HR ||20-25 TON/HR |
|03 ||FEED HOPPER CAPACITY ||500 Kg ||700 Kg |
|04 ||SCREW ||TOUGHEND ||TOUGHEND |
|05 ||SCREW MOTOR ||22.5 kW / 30 HP ||22.5 kW / 30 HP |
|06 ||TWIN LOBE AIR BLOWER ||PI-19 ||PI-22 |
|07 ||BLOWER MOTOR ||30 kW / 40 HP ||37.5 kW / 50 HP |
|08 ||STRUTURE ||WITH WHEEL/ANTI VIBRATION PAD ||WITH WHEEL/ANTI VIBRATION PAD |
|09 ||POWER SUPPLY ||415 V AC ± 10%, 3 PHASE, 50 HZ ± 5% |
Following Accessories Included
- Suction Silencer
- Discharge Silencer
- Spring Loaded safety Valve
- Pressure gauge
- Suction Filter
- Driven Pulley
- Non Return Valve
- V-Belt Set
- V- Belt Guard
- Drive Pulley
- Closed System
- Ensures contamination free transfer for material
- No Spillage or wastage involved
- Minimum Maintenance
- Speedy & User friendly designs