Cement Feeding System

<< Previous Cement Feeding System

Product Code : 04

Product Specification

CEMENT FEEDING SYSTEM

DESCRIPTION
It is the most versatile and speedy method of transferring bulk material from one point to another within a defined area.

APPLICATIONS
The PNEUCON Screw Pumps are heavy-duty, screw-type pneumatic pumps. These pump systems are most commonly used to convey dry, free-flowing, pulverized materials from grinding mills, transfer materials from silo to silo, transfer dust from collectors, and load and unload railcars, ships and barges. The materials are conveyed literally anywhere a pipeline can be run and to any number of delivery points.

GENERAL SPECIFICATIONS
PNEUCON Screw Pumps are constructed of mild and structural steel, and mounted on a base. PS pumps are equipped with pedestal blocks that support a pump screw which helps to provide a smooth, balanced operation. The screw is dynamically balanced and areas of this screw, along with other parts of the pump in direct contact with the material to be conveyed, are made of hardened, wear-resistant material and special hard surfacing where required. The screw is directly coupled to the driving motor but can be v-belt driven.

Standard equipment on PS pumps includes a pressurized seal and bearing assembly that extends the service life of the discharge seals by preventing the material being handled from entering the bearing area. Each pump system includes the pump, drive motor and compressed air source.

OPRATION
The materials to be conveyed enter the hopper by gravity or dumped by any means. The material is compacted as it is advanced. Its density is further increased in the space between the terminal flight of the screw and the face of the non-return valve to form a seal against the transport line pressure, thus preventing blowback. The material then enters the discharge body, is fluidized by compressed air, and is conveyed into the transport line.

TECHNICAL SPECIFICATION

SR.	ITEM DESCRIPTION	SPECIFICATION
01	MODEL	PSP-I	PSP-II
02	OUTPUT CAPACITY*	12-15 TON/HR	20-25 TON/HR
03	FEED HOPPER CAPACITY	500 Kg	700 Kg
04	SCREW	TOUGHEND	TOUGHEND
05	SCREW MOTOR	22.5 kW / 30 HP	22.5 kW / 30 HP
06	TWIN LOBE AIR BLOWER	PI-19	PI-22
07	BLOWER MOTOR	30 kW / 40 HP	37.5 kW / 50 HP
08	STRUTURE	WITH WHEEL/ANTI VIBRATION PAD	WITH WHEEL/ANTI VIBRATION PAD
09	POWER SUPPLY	415 V AC+ 10%, 3 PHASE, 50 HZ + 5%

FOLLOWING ACCESSORIES INCLUDED

Suction Silencer	Non Return Valve
Discharge Silencer	V-Belt Set
Spring Loaded safety Valve	V- Belt Guard
Pressure gauge	Drive Pulley
Suction Filter	Driven Pulley